Can I remove a dent myself?

Start off by heating the car dent with the hair dryer at its highest temperature, which will expand the plastic of the car. As soon as it’s hot enough, grab the can of compressed air, turn it upside down, and begin spraying that same area. Since the cold air will cause the plastic to contract, the dent will pop out.

Use boiling water

Don’t just limit your use of boiling water for cooking and sanitary purposes. It can also be used to potentially remove unwanted depressions in your vehicle, that is, as long as you have a plastic bumper and are successfully able to access the dent from the backside.

First, heat the dent with the hairdryer approximately six inches away for about 30 seconds. Then cover the dent with a piece of aluminum foil and rub dry ice over it. The rapid change from hot to cold should make the dent pop out within a minute or so. Another temperature trick involves boiling water.

While it does work on metal, parts like side mirrors, lights, and wheels will not work. Pouring hot water over metal also has its problems. It could warp the metal out of shape, make it less sturdy; it could even ruin your paint job if your paint isn’t up to par.

Method 1 of 3: Use a plunger

It is particularly ideal for shallow, small- to medium-sized dents on flat, metal surfaces such as a vehicle door, hood, or roof. (It will not work on plastic.)

Do they work? Dent pullers only work on shallow dents that are positioned on a flat, flexible surface. They can improve the appearance of car dents but are unlikely to create a perfect finish. Unfortunately, DIY dent pullers will not work on deep, angular dents or damage along the edges of bodywork.

False. Pouring hot water over a car’s windshield during low temperatures can damage it, causing it to crack or shatter from the sudden temperature change.

To remove a dent in a car with a hair dryer, start by applying heat to the dent with a dryer held 5-7 inches away from the car. Then, place a sheet of aluminum foil over the dent, and put on a pair of thick rubber gloves. Pick up a piece of dry ice and rub it over the dented area for 30-50 seconds.

The dent repair cost may range from $50 to $2,500. Although that’s a broad range, most small dents that are roughly an inch in size may cost around $50 to $125. Small indentations may come from a flying rock or piece of hail. Dents stemming from a collision are typically larger and cost $150 or more.